|
Also winner of 1999-2003
| |
 |
|
Place the clogged cartridge in about 1/4 - 1/2 inch of warm water for a
few minutes. When ink starts to slowly leak out take the cartridge
out of the water and dry it using a soft cloth to "Q-tip."
Then place it back in your printer and run the print head cleaning utility
that comes with your printer software. You may have to run this 2-4
times before printing quality is reestablished. This works about 75%
of the time, if it does not then the cartridge has dried out too much and
will have to be replaced.
This page developed by
Xrefill |
|
