Instructions

1. Put the cartridge on some paper towels in an area where you can tolerate a spill.

2. Peal off the top label.

3. Fill the syringe with 15 ml. of black ink.

4. Very S-L-O-W-L-Y inject ink into any hole (they all go to the same sponge, HP just used the same color mold for the black ink cartridges).

5. When finished, replace the top label.

6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.

This page developed by Xrefill- Ink Refill Kits